# Ajuda sobre shield cnc‏

**URL:** <https://forum.fazedores.com/t/ajuda-sobre-shield-cnc/1980>\
**Category:** CNC\
**Created:** [Outubro 14, 2015, 8:52pm UTC](https://forum.fazedores.com/t/ajuda-sobre-shield-cnc/1980 "2015-10-14T20:52:06Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Alberto](https://avatars.discourse-cdn.com/v4/letter/a/ea5d25/32.png) [@Alberto](https://forum.fazedores.com/u/Alberto)\
**Post date:** [Outubro 14, 2015, 8:52pm UTC](https://forum.fazedores.com/t/ajuda-sobre-shield-cnc/1980/1 "2015-10-14T20:52:06Z")

</div>

Universal GCode Sender não transfere o [arquivo.NC](http://arquivo.NC) , comunicando erro " Error while starting file stream: Command#3 too long : "

Por favor alguém poderia me ajuda ?

---

<div class="post-metadata">

**Author:** ![Jeferson\_Simoes](https://sea2.discourse-cdn.com/flex016/user_avatar/forum.fazedores.com/jeferson_simoes/32/1019_2.png) [@Jeferson\_Simoes](https://forum.fazedores.com/u/Jeferson_Simoes)\
**Post date:** [Outubro 16, 2015, 11:58pm UTC](https://forum.fazedores.com/t/ajuda-sobre-shield-cnc/1980/2 "2015-10-16T23:58:38Z")

</div>

Qual programa usou para gerar o Gcode?

Posta as primeiras linhas.

[https://github.com/winder/Universal-G-Code-Sender/issues/162](https://github.com/winder/Universal-G-Code-Sender/issues/162)