# Proplema ao carregar a placa - Arduino

**URL:** <https://forum.fazedores.com/t/proplema-ao-carregar-a-placa-arduino/6682>\
**Category:** Arduino\
**Created:** [Setembro 7, 2019, 4:50pm UTC](https://forum.fazedores.com/t/proplema-ao-carregar-a-placa-arduino/6682 "2019-09-07T16:50:36Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Andy](https://avatars.discourse-cdn.com/v4/letter/a/aeb1de/32.png) [@Andy](https://forum.fazedores.com/u/Andy)\
**Post date:** [Setembro 7, 2019, 4:50pm UTC](https://forum.fazedores.com/t/proplema-ao-carregar-a-placa-arduino/6682/1 "2019-09-07T16:50:36Z")

</div>

Estou tentando fazer uma programação simples em meu arduino, mas essa mensagem de erro aparece sempre; o que pode ser ?

Arduino: 1.8.9 (Windows 7), Placa:“Arduino/Genuino Uno”

O sketch usa 1008 bytes (3%) de espaço de armazenamento para programas. O máximo são 32256 bytes.  
Variáveis globais usam 9 bytes (0%) de memória dinâmica, deixando 2039 bytes para variáveis locais. O máximo são 2048 bytes.  
avrdude: stk500\_recv(): programmer is not responding  
avrdude: stk500\_getsync() attempt 1 of 10: not in sync: resp=0x1c  
avrdude: stk500\_recv(): programmer is not responding  
avrdude: stk500\_getsync() attempt 2 of 10: not in sync: resp=0x1c  
avrdude: stk500\_recv(): programmer is not responding  
avrdude: stk500\_getsync() attempt 3 of 10: not in sync: resp=0x1c  
avrdude: stk500\_recv(): programmer is not responding  
avrdude: stk500\_getsync() attempt 4 of 10: not in sync: resp=0x1c  
avrdude: stk500\_recv(): programmer is not responding  
avrdude: stk500\_getsync() attempt 5 of 10: not in sync: resp=0x1c  
avrdude: stk500\_recv(): programmer is not responding  
avrdude: stk500\_getsync() attempt 6 of 10: not in sync: resp=0x1c  
avrdude: stk500\_recv(): programmer is not responding  
avrdude: stk500\_getsync() attempt 7 of 10: not in sync: resp=0x1c  
avrdude: stk500\_recv(): programmer is not responding  
avrdude: stk500\_getsync() attempt 8 of 10: not in sync: resp=0x1c  
avrdude: stk500\_recv(): programmer is not responding  
avrdude: stk500\_getsync() attempt 9 of 10: not in sync: resp=0x1c  
avrdude: stk500\_recv(): programmer is not responding  
avrdude: stk500\_getsync() attempt 10 of 10: not in sync: resp=0x1c  
Problema ao carregar para a placa. Veja [http://www.arduino.cc/en/Guide/Troubleshooting#upload](http://www.arduino.cc/en/Guide/Troubleshooting#upload) para sugestões.

Este relatório teria mais informações com  
“Mostrar a saida detalhada durante a compilação”  
opção pode ser ativada em “Arquivo -\> Preferências”