# Status conexão Bluetoth

**URL:** <https://forum.fazedores.com/t/status-conexao-bluetoth/5261>\
**Category:** Arduino\
**Created:** [Março 27, 2018, 2:59am UTC](https://forum.fazedores.com/t/status-conexao-bluetoth/5261 "2018-03-27T02:59:38Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![adriano.cm](https://avatars.discourse-cdn.com/v4/letter/a/47e85d/32.png) [@adriano.cm](https://forum.fazedores.com/u/adriano.cm)\
**Post date:** [Março 27, 2018, 2:59am UTC](https://forum.fazedores.com/t/status-conexao-bluetoth/5261/1 "2018-03-27T02:59:38Z")

</div>

Olá Pessoal.

Estou usando modulo bluetooth hc-06 e arduino Uno.  
Quero fazer com que acenda um led quando o bluetooth se conecte.  
Não consigo achar o status da conexão do modulo. Tentei usar a pinagem STATE no modulo e nada.  
Me ajudem.

---

<div class="post-metadata">

**Author:** ![adriano.cm](https://avatars.discourse-cdn.com/v4/letter/a/47e85d/32.png) [@adriano.cm](https://forum.fazedores.com/u/adriano.cm)\
**Post date:** [Abril 9, 2018, 11:22pm UTC](https://forum.fazedores.com/t/status-conexao-bluetoth/5261/2 "2018-04-09T23:22:08Z")

</div>

me ajudem. quero achar o estado conectado e desconectado do bluetooth do arduino (HC-06)